Skip to content

TD-1 Commands

These commands are used calibrate TD-1 device(s) and capture TD and color from TD-1 devices. These commands are only valid/show up if TD-1 device is configured in moonraker.

[AFC_GET_TD_ONE_DATA]

This macro displays a prompt to select which lane or all lanes to gather TD-1 data from.

Calibrating TD-1 bowden length with AFC_CALIBRATION should be ran first before calling this macro.

Usage

AFC_GET_TD_ONE_DATA

Example 
AFC_GET_TD_ONE_DATA

[AFC_GET_TD_ONE_LANE_DATA]

This macro gets TD-1 data for the specified lane by moving filament the calibrated TD-1 length. Calibrating TD-1 bowden length with AFC_CALIBRATION should be ran first before calling this macro.

Usage

AFC_GET_TD_ONE_LANE_DATA LANE=<lane>

Example 
AFC_GET_TD_ONE_LANE_DATA LANE=lane1

NO_DOC: True

[AFC_RESET_TD1]

This macro calls moonrakers api endpoint to reset specified TD-1 device by supplied serial number.

Usage

AFC_RESET_TD1 SERIAL=<serial_number>

Example 
AFC_RESET_TD1 SERIAL=E6625877D318C430

[AFC_UNIT_TD_ONE_CALIBRATION]

Open a prompt to calibrate the Bowden length to a TD-1 device for a specific lane in the selected unit. Provides buttons for each lane, with a note to only calibrate one lane per unit.

Usage

AFC_UNIT_TD_ONE_CALIBRATION UNIT=<unit>

Example 
AFC_UNIT_TD_ONE_CALIBRATION UNIT=Turtle_1